SuperSilent Diamond Panel Saw Blades


  • MicroGeo Diamond teeth
  • 2mm ultra thin kerf
  • Direct-Chip-Guide removes chips and Chip Belt carries chips away from cutting path


  • Exceptionally low costs per cut
  • Scalpel-like cuts with clean entry and exit edges
  • Cutting all materials allows machines to keep running without blade changes

Part Numbers

Main Blade

Part No. D d B b Teeth Keyways or Holes
4A1-0B00 303 30 2 1.8 43 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60

Score Blade

Part No. D d B b B1 Teeth
4A2-0B02 120 22 2 1.8 2.4 20

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to