Universal Insert Router Bits C
- Designed for use on C.N.C. router machines.
- Can also be used on stationary overhead routers.
- Use with mechanical feed operations.
- CNC router must have excellent hold downs to ensure the least possibility of part movement.
- To profile edges on decorative panels, doors, frames, etc.
- Shank style cutter body design uses 2 non-turnable profiled carbide inserts.
- Available in a 2-wing (flute) design only.
- Requires the use of backing plates to support the profiled cutting region.
- Standard hook angle is 10° positive.
- Comes complete with cutter body, wedges, screws and allen wrench.
- Insert router bit is manufactured in right-hand rotation.
- Maximum RPM for 3/4″ Shank = 10,000, 1″ Shank = 12,000
- Cutter head is able to produce numerous profiles by simply changing the insert.
- Extended tool life over brazed tooling due to insert accuracy and superior carbide grades.
- Produces a constant cutting circle so setup and machine adjustments are reduced to a minimum.
- Lower tooling costs due to decreased down time required for tooling changes.
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).
WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.