Woodworking tools cutting tools manufacturers TCG Main Panel Saw Blades

TCG Main Panel Saw Blades

(For Cutting: MDG, Laminated & Raw MDF, Plywood, Particle Board)

Features

  • Used for cutting single and stacked sheets of laminated or raw MDF, Particleboard, Plywood, etc.

Woodworking tools cutting tools manufacturers TCG Main Panel Saw Blades

Part Numbers

Part No. Diameter Teeth Bore Size Hook Angle Kerf Plate Keyways or Holes
Qty.-Dia.-B.C.
SC720 220 64 30 -5º 2.9 2.1 2/7/42
SC724 300 60 30 10º 4.4 3.2
SC724-01 300 60 80 10º 4.4 3.2  4-9-100
SC724-02 300 60 80 10º 4.4 3.2 2-14-110
SC724-03 300 60 50 10º 4.4 3.2 3/15/80
SC724-04 300 60 75 10º 4.4 3.2
SC724-05 300 60 65 10º 4.4 3.2 2-9-110
SC725 300 72 75 10º 4.4 3.2
SC719 300 96 30 -5º 3.2 2.4 2/10/60
SC733 350 60 75 12º 4.4 3.2
SC731 350 72 30 10º 4.4 3.2
SC731-01 350 72 80 10º 4.4 3.2
SC731-02 350 72 80 10º 4.4 3.2 2-14-110
SC731-03 350 72 75 10º 4.4 3.2
SC731-04 350 72 80 10º 4.4 3.2 2-7-110
SC731-05 350 72 30 10º 4.4 3.2 4-9-100
SC731-06 350 72 80 10º 4.4 3.2 4-15-110
SC731-07 350 72 80 10º 4.4 3.2 2-9-130
SC731-08 350 72 80 10º 4.4 3.2 4-8-100
SC731-09 350 72 80 10º 4.4 3.2 2-14-100
SC731-10 350 72 80 10º 4.4 3.2 2-7-110
SC738 370 72 30 10º 4.4 3.2
SC741 380 72 60 10º 4.8 3.5 2-14-100
SC741-01 380 72 75 10º 4.8 3.5 2-14-100 + 3-15-75
SC741-02 380 72 75 10º 4.8 3.5 2-14-100
SC745Q 400 72 30 10º 4.4 3.2
SC745-01 400 72 60 10º 4.4 3.2 1/11/08
SC746Q 400 72 75 10º 4.4 3.2 4-15-105
SC746-01 400 72 80 10º 4.4 3.2 4-15-105 + 2-14-110
SC746-02 400 72 80 10º 4.4 3.2 4-15-105 + 4-9-100
SC746-03 400 72 80 10º 4.4 3.2 4-15-105 + 2-7-110
SC746-04 400 72 80 10º 4.4 3.2 4-15-105 + 4-19-120
SC746-05 400 72 80 10º 4.4 3.2 4-15-105 + 2-9-130
SC751 420 72 60 10º 4.8 3.2
SC757 430 72 80 15º 4.4 3.2 4-19-120 + 2-8.4-130
SC761 450 72 30 12º 4.4 3.2
SC761-01 450 72 80 12º 4.4 3.2 4-9-100
SC761-02 450 72 80 12º 4.4 3.2 2-14-110
SC761-03 450 72 80 12º 4.4 3.2 2-7-110
SC761-04 450 72 80 12º 4.4 3.2
SC761-05 450 72 75 12º 4.4 3.2
SC762Q 450 72 60 12º 4.8 3.5 2-14-125
SC762-01 450 72 80 12º 4.8 3.5 2-14-125 + 4-19-120
SC762-02 450 72 80 12º 4.8 3.5 2-14-125 + 2-9-130
SC762-03 450 72 80 12º 4.8 3.5 2-14-125
SC771 470 72 75 15º 4.8 3.5 4-15-105
SC774 480 72 80 15º 4.8 3.5 4-19-120 + 2-8.4-130
SC775 480 72 30 15º 4.4 3.2
SC781 500 72 60 15º 4.8 3.5 2-10-80 + 2-11-115
SC781-01 500 72 80 15º 4.8 3.5 2-10-80 + 2-11-115 + 4-9-100
SC781-02 500 72 80 15º 4.8 3.5 2-10-80 + 2-11-115 + 2-14-110
SC781-03 500 72 80 15º 4.8 3.5 2-10-80 + 2-11-115 + 2-7-110
SC782 500 60 60 15º 4.8 3.5 2-11-115
SC792 600 72 60 15º 5.8 4 2-11-115 + 2-19-120

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.