Reverse Radial Scoring Blades

(For MDG, Laminated & Raw MDF, Plywood, Particle Board)

Features

  • Designed for the high demands of panel saws
  • For pre-scoring the bottom sheet
  • Can also be used on sliding table saws
  • Also used table saws that utilize pre-scoring units

Part Numbers

Flat Top Scoring Blades

Part No. Diameter Teeth Bore Size Kerf Plate Keyways or Holes Qty.-Dia.-B.C. Tooth Style
SC548 125 24 1-1/4″ 4.4 3.2 FL-RR
SC548-01 125 24 45 4.4 3.2 FL-RR
SC626 125 24 45 4.8 3.5 FL-RR
SC551 150 24 1-1/4″ 4.4 3.2 FL-RR
SC635 150 24 20 4.4 3.2 FL-RR
SC635-01 150 24 45 4.4 3.2 FL-RR
SC635-02 150 24 30 4.4 3.2 FL-RR
SC645 160 36 45 4.4 3.2 3/7/66 FL-RR
SC645-01 160 36 55 4.4 3.2 3/7/66 FL-RR
SC645-02 160 36 45 4.4 3.2 3/11/70 FL-RR
SC646 160 36 45 4.8 3.2 FL-RR
SC646-01 160 36 55 4.8 3.2 FL-RR
SC656 180 36 45 4.8 3.5 FL-RR
SC557 200 36 20 4.4 3.2 FL-RR
SC557-01 200 36 30 4.4 3.2 FL-RR
SC557-02 200 36 65 4.4 3.2 2-9-110 FL-RR
SC557-03 200 36 45 4.4 3.2
SC572 200 36 45 4.8 3.5 FL-RR
SC572-01 200 36 65 4.8 3.5 2-9-110 FL-RR
SC667Q 200 36 45 5.8 4 FL-RR
SC675A 215 42 50 4.8 3.5 3/15/80 FL-RR
SC676Q 215 42 50 4.4 3.2 3/15/80 FL-RR

ATB Scoring Blades

Part No. Diameter Teeth Bore Size Kerf Plate Keyways or Holes Qty.-Dia.-B.C. Tooth Style
SC566 200 36 4.4 45 3.2 ATB-RR
SC569 200 36 4.4 30 3.2 ATB-RR
SC575 200 36 4.8 45 3.5 2-9-110 ATB-RR
SC575-01 200 36 4.8 65 3.5 2-9-110 ATB-RR

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.