Woodworking tools cutting tools manufacturers router bit

Standard Insert Router Bits G


  • Designed for use on CNC router machines.
  • Also can be for stationary overhead routers.
  • Use with mechanical feed operations.
  • CNC router must have excellent hold downs to ensure the least possible part movement.
  • To round or bevel edges on decorative parts, panels, etc.

Technical Information

  • Shank style cutter body design uses 2 non-turnable profiled carbide inserts.
  • Cutter body profile matches the carbide insert.
  • Requires no backing plates or clamping wedges.
  • Mechanically fasten insert by the use of face mount screws.
  • Maximum RPM 18,000


  • Reduced set-up time because of fewer parts and a constant cutting circle.
  • Extended tool life over brazed tooling due to insert accuracy and superior carbide grades.
  • Also, one cutter body is capable of producing all of the radii and bevels by simply changing the inserts.

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.