One Flute Downcut Bits
All measurements are in inches unless otherwise specified.
For Standard Cutting
Material: Feed Rates
- Softwoods: 150-300 IPM
- Hardwoods: 150-300 IPM
- Raw MDF & Particleboard: 150-300 IPM
End Point: Finish Quality
- End Point Style: End Mill
- Optimized for excellent top finish
Part Numbers
Part No. | Hole Diameter | Edge Length | Shank Size | Overall Length | Helix Angle |
RS380 | 1/8 | 1/2 | 1/4 | 2 | 30˚ |
RS324 | 3/16 | 3/4 | 1/4 | 2 | 30˚ |
RS325 | 1/4 | 7/8 | 1/4 | 2-1/2 | 30˚ |
RS326 | 1/4 | 1 | 1/4 | 2-1/2 | 30˚ |
RS328 | 5/16 | 1-1/8 | 5/16 | 3 | 30˚ |
RS327 | 3/8 | 1-1/8 | 3/8 | 3 | 30˚ |
RS329 | 1/2 | 1-1/8 | 1/2 | 3 | 30˚ |
For Fiber Reinforced Plastics & Aluminum
Material: Feed Rates
- Aluminum: 150 IPM
- Fiber Reinforced Plastics: 100 IPM
End Point: Finish Quality
- End Point Style: End Mill
- Optimized for excellent
bottom finish.
Specs Sheet
Part No. | Hole Diameter | Edge Length | Shank Size | Overall Length | Helix Angle |
RS440 | 1/8 | 1/2 | 1/4 | 2 | 30˚ |
RS441 | 1/4 | 3/4 | 1/4 | 2-1/2 | 30˚ |
RS442 | 5/16 | 13/16 | 3/8 | 2-1/2 | 30˚ |
RS443 | 3/8 | 7/8 | 3/8 | 2-1/2 | 30˚ |
Safety Guidelines
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).
WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.