woodworking tools cutting tools manufacturer panel scoring saw blades

AKE Reverse Radial Scoring Blades

(For Cutting: Laminated & Raw MDF, Plywood, Particle Board)

Features

  • Designed for the high demands of panel saws
  • For pre-scoring the bottom sheet
  • Can also be used on sliding table saws
  • Also used on table saws that utilize pre-scoring units

woodworking tools cutting tools manufacturer AKE reverse radial scoring blades

Part Numbers

Flat Top Scoring Blades

Part No. Diameter Teeth Bore Size Kerf Plate Keyways or Holes
Qty.-Dia.-B.C.
Tooth Style
SC485 150 24 20 4.4 3.2 FL-RR
SC485-01 150 24 45 4.4 3.2 FL-RR
SC486Q 160 28 45 4.4 3.2 3 ph 11/70 FL-RR
SC486-01 160 36 55 4.4 3.2 3 ph 11/70 FL-RR
SC487 180 36 45 4.8 3.5 FL-RR
SC479 200 36 20 4.4 3.2 FL-RR
SC480 200 36 65 4.8 3.5 2 ph 9/100 + 2 ph 9/110 FL-RR
SC481 200 36 65 4.4 3.5 2 ph 9/100 + 2 ph 9/110
SC482 200 36 45 4.8 3.5 FL-RR
SC488 200 36 45 5.8 4 FL-RR
SC489 215 42 50 4.4 3.2 3 ph 15/80 FL-RR

2 Piece Adjustable

Part No. Diameter Teeth Bore Size Kerf Plate Keyways or Holes Qty.-Dia.-B.C. Tooth Style
SC450 100 24 20 2.8-3.6 4 FL-RR
SC451 120 24 50 2.8-3.6 4.4 FL-RR
SC452 120 24 20 2.8-3.6 4 FL-RR
SC453 120 24 22 2.8-3.8 4 FL-RR

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.