AKE Main Panel Saw Blades

(For Cutting: Laminated & Raw MDF, Plywood, Particle Board)

Features

  • Designed for the high demands of panel saws
  • Used for cutting single and stacked sheets of laminated or raw MDF, Particleboard, Plywood, etc.
  • Triple chip tooth design for high quality cuts and longevity.

woodworking tools cutting tools manufacturer AKE main panel saw blades

Part Numbers

Part No. Diameter Teeth Bore Size Hook Angle Kerf Plate Keyways or Holes Qty.-Dia.-B.C.
SC455 220 64 30 10º 2.9 2.1 2 ph 7/42 + 2 ph 9/46.5 + 2 ph 10/60
SC456 300 60 30 10º 4.4 3.2 2 ph 10/60
SC457 300 72 75 10º 4.4 3.2
SC454 300 96 30 10º 3.2 2.4 2 ph 7/42 + 2 ph 9/46.5 +_2 ph 10/60
SC461 350 54 75 12º 4.4 3.2
SC459 350 72 30 10º 4.4 3.2 2 ph 10/60
SC459-01 350 72 80 10º 4.4 3.2 2 ph 10/60
SC460 350 72 75 10º 4.4 3.2
SC462 370 72 30 10º 4.4 3.2
SC463 380 72 60 10º 4.8 3.5 2 ph 14/100 + 2 ph 14/125
SC464 400 72 30 10º 4.4 3.2
SC465 400 72 75 10º 4.4 3.2 4 ph 15/105
SC465-01 400 72 80 10º 4.4 3.2 4 ph 15/105
SC466 420 72 60 10º 4.8 3.2
SC467 430 72 80 15º 4.4 3.2 2 ph 9/130 + 4 ph 19/120
SC468 450 72 30 12º 4.4 3.2 2 ph 10/’60
SC469 450 72 60 12º 4.8 3.5 2 ph 14/125 + 2 ph 19/120
SC470 450 72 80 12º 4.8 3.5 4 ph 19/120 + 2 ph 9/130
SC471 470 72 75 15º 4.8 3.5
SC472 480 72 80 15º 4.8 3.5 4 ph 19/120 + 2 ph 9/130
SC473 480 72 30 15º 4.4 3.2
SC474 500 72 60 15º 4.8 3.5 2 ph 11/115
SC475 500 60 60 15º 4.8 3.5 2 ph 11/115
SC490 510 72 60 15º 4.8 3.5 4-19-120 + 2-9-130
SC476 600 72 60 15º 5.8 4 2 ph 11/115 + 2 ph 19/120
SC477 600 60 60 15º 5.8 4 2 ph 11/115 + 2 ph 19/120

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.