Woodworking tools cutting tools manufacturers Upcut Bits Hard Plastics

Upcut Bits – Hard Plastics (Metric)

All measurements are in inches unless otherwise specified.

For cutting hard plastics

Material: Feed Rates
  • Hard Brittle Plastics: 200 IPM
  • Solid Surface: 100-180 IPM
End Point: Finish Quality
  • End Point Style: Crescent
  • Optimized for excellent bottom finish

Part Numbers

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS800 2mm 8mm 2mm 50mm 30°
RS801 2mm 8mm 6mm 64mm 30°
RS802 2.5mm 8mm 2.5mm 50mm 30°
RS803 2.5mm 8mm 6mm 64mm 30°
RS804 3mm 8mm 3mm 50mm 30°
RS822 8mm 38mm 8mm 76mm 30°
RS823 10mm 30mm 10mm 76mm 30°
RS805 3mm 8mm 6mm 64mm 30°
RS806 3mm 12mm 3mm 64mm 30°
RS807 3mm 12mm 6mm 64mm 30°
RS808 4mm 8mm 4mm 64mm 30°
RS809 4mm 12mm 4mm 64mm 30°
RS810 4mm 20mm 4mm 64mm 30°
RS811 4mm 20mm 6mm 64mm 30°
RS812 4mm 30mm 4mm 64mm 30°
RS813 5mm 16mm 5mm 64mm 30°
RS814 5mm 16mm 6mm 64mm 30°
RS815 5mm 30mm 5mm 64mm 30°
RS816 6mm 8mm 6mm 64mm 30°
RS817 6mm 12mm 6mm 64mm 30°
RS818 6mm 20mm 6mm 64mm 30°
RS819 6mm 30mm 6mm 76mm 30°
RS820 6mm 38mm 6mm 76mm 30°
RS821 8mm 25mm 8mm 64mm 30°
RS822 8mm 38mm 8mm 76mm 30°
RS823 10mm 30mm 10mm 76mm 30°

Download Product Spec Sheet

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.