Woodworking tools cutting tools manufacturers Three Flute Downcut Low Helix Finisher

Three Flute Downcut Low Helix Finisher

All measurements are in inches unless otherwise specified.

Low Helix Finisher Spirals

Material: Feed Rates
  • Softwoods: 200-600 IPM
  • Hardwoods: 200-500 IPM
  • Solid Surface: 100-300 IPM
  • Hard Birttle Plastics: 300 IPM
  • Raw MDF & Particleboard: 200-500 IPM
End Point: Finish Quality
  • End Point Style: End Mill
  • Optimized for excellent top finish

Part Numbers

Part No. Hole Diameter Edge Length Shank Size Overall Length Helix Angle
RS770 1/4 3/8 1/4 3 10˚
RS771 1/4 7/8 1/4 3 10˚
RS772 3/8 5/8 3/8 3 10˚
RS269 3/8 1-1/8 3/8 3 10˚
RS266 1/2 1-1/8 1/2 3-1/2 10˚
RS272 1/2 1-5/8 1/2 4 10˚
RS776 1/2 2-1/8 1/2 4-1/2 10˚
RS267 3/4 1-5/8 3/4 4 10˚
RS778 3/4 2-1/8 3/4 5 10˚

Download Product Spec Sheet

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.