Ultra Thin Kerf Blades

(For Cutting: Softwoods and Hardwoods)

Features

  • Designed for high quality cross cutting with minimum waste
  • Provides smooth cuts with minimum tearout on end grain applications especially in thin material
  • Use of stiffening collars is recommended

Part Numbers

ATB Saw Blades

Part No. Diameter Teeth Bore Size Hook Angle Kerf Plate Keyways or Holes Qty.-Dia.-B.C. Machine
SC084 8″ 60 5/8″ .090″ .059″ Table & Cut-Off Saws
SC085 10″ 40 5/8″ 10º .090″ .059″ Table & Cut-Off Saws
SC086 10″ 60 5/8″ 10º .090″ .059″ Table & Cut-Off Saws
SC178 10″ 80 5/8″ 10º .090″ .060″ Table & Cut-Off Saws
SC087 12″ 60 1″ 10º .090″ .059″ Table & Cut-Off Saws
SC088 12″ 80 1″ 10º .090″ .059″ Table & Cut-Off Saws
SC089 12″ 100 1″ .090″ .059″ Table & Cut-Off Saws

TCG Saw Blades

Part No. Diameter Teeth Bore Size Hook Angle Kerf Plate Keyways or Holes Qty.-Dia.-B.C. Machine
SC090 10″ 40 5/8″ 10º .090″ .059″ Table & Cut-Off Saws
SC091 10″ 60 5/8″ 10º .090″ .059″ Table & Cut-Off Saws
SC093 10″ 80 5/8″ 10º .090″ .059″ Table & Cut-Off Saws
SC094 12″ 80 1″ .090″ .059″ Table & Cut-Off Saws
SC095 12″ 100 1″ .090″ .059″ Table & Cut-Off Saws

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.