Woodworking tools cutting tools manufacturers diamond pcd compression 3 wing

Diamond PCD Compression 3 Wing


  • Grooving, jointing, rebating, sizing of raw or coated chipboard and MDF material


  • Less waste of material
  • Low cutting force
  • Good edge quality on top and bottom

Technical Information

  • RPM: 18,000-35,000
  • Feed rate: 590-1375 in/min (depending on material type and thickness)

Part Numbers

Part No. D L2 L1 S Material Thickness
RN300 12 22 75 12×45 .394″-.750″
RN301 12.7 (.500) 28 85 12×45 512″-.866″
RN302 12.7 (.500) 28 85 12.7 (.500)x45 512″-.866″
RN303 16 21 95 20×55 .512″-.748″
RN304 16 29 100 20×55 .748″-.984″
RN305 18 52 130 20×55 1.102″-1.89″

Download Product Spec Sheet

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.