Woodworking tools cutting tools manufacturers saw blades High Performance Scoring Blades

High-Performance Scoring Blades

(For Cutting: MDG, Laminated & Raw MDF, Plywood, Particle Board)

Features

  • Designed specifically for high-powered panel saws machines and sliding table saws
  • Exceptional tool life and cut quality for reduced cost-per-cut
  • Resharpenable at your regional MaxxLife Service Center
Adjusting Scoring

The width and depth of the score (B1) are obtained by adjusting the height of the scoring blade into the material. Increasing blade height increases score width and depth.
Woodworking tools cutting tools manufacturers saw blades High Performance Scoring Blades

Part Numbers

Part No. Diameter Teeth Bore Size Hook Angle Kerf Plate Keyways or Holes
Qty.-Dia.-B.C.
Machine
455-9A00 80 12 20 3.1-4.3 2.2
455-9A01 100 20 20 3.1-4.3 2.2 Schelling
455-9A02 105 16 45 3.1-4.3 2.2 Kraftlyne
455-9A03 120 24 20 3.1-4.3 2.2
455-9A04 120 24 22 3.1-4.3 2.2
455-9A05 120 24 30 3.1-4.3 2.2
455-9A06 125 24 20 3.1-4.3 2.2 Panhans
455-9A07 125 24 20 3.1-4.3 2.2 2/8/42 Frama
455-9A08 125 24 22 3.1-4.3 2.2 Panhans
455-9A09 125 24 45 4.4-5.6 3.2 Giben-Homag
455-9A10 125 24 20 4.4-5.6 3.2 Gabbiani-SCM
450-9A00 150 24 20 4.4-5.6 3.2 Schelling
450-9A01 150 24 30 4.4-5.6 3.2 SCM
450-9A02 150 24 45 4.4-5.6 3.2 Homag
450-9A03 160 36 45 4.4-5.6 3.2 3/13/80
450-9A04 160 36 55 4.4-5.6 3.2 3/7/66 Gabbiani-SCM
450-9A05 180 28 30 4.4-5.6 3 2/7/42 + 2/10/60 Panhans
450-9A06 180 36 45 4.8-5.8 3.5 Holzma
450-9A07 180 42 50 4.4-5.6 3.2 3/13/80 Giben
450-9A08 180 36 45 4.4-5.6 3.2 3/13/80 Giben
450-9A09 180 36 45 4.4-5.6 3.2 Holzma
450-9A10 200 36 20 4.4-5.6 3.2 2/9/110 + 2/11/66 Schelling
450-9A11 200 36 30 4.4-5.6 3.2 2/9/60 Scheer
450-9A12 200 36 45 4.8-5.8 3.5 Holzma
450-9A13 200 36 65 4.8-5.8 3.5 2/9/100  + 2/9/110 Selco
450-9A14 200 42 50 4.4-5.6 3.2 3/13/80 Giben Smart 65
450-9A15 200 36 20 5.5-6.7 3.4 Schelling
450-9A16 200 36 45 5.5-6.7 3.4 Holzma
450-9A17 200 36 65 4.4-5.6 3.2 2/9/100 + 2/9/110 Selco
450-9A18 200 36 80 4.4-5.6 3.2 2/14/110 Gabbiani
450-9A19 200 36 45 5.8-6.8 3.5 Holzma
450-9A20 200 36 45 6.2-7.2 4 Holzma
450-9A21 215 42 50 4.4-5.6 3.2 3/15/80 Giben
450-9A22 215 42 50 4.8-5.8 3.5 3/15/80 Giben
450-9A23 220 36 20 6.5-7.4 4.5 Schelling
450-9A24 250 42 50 4.4-5.6 3.2 3/13/80 Giben 2
450-9A25 300 48 50 4.4-5.6 3.2 3/15/80 Giben
450-9A26 300 48 65 4.4-5.6 3.2 2/9/100 + 2/9/110 Selco EB

Download Product Spec Sheet

Additional Resources

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. Peak Toolworks assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification of any product (including sharpening).

WARNING: Re-grinding of Peak Toolworks products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.

WARNING: Peak Toolworks products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.